Is the Water Safe in Atlanta, GA?
The 1 public water system serving Atlanta, Georgia (population 1,089,893) average a Water Safety Score of 10/100, with a worst grade of F. These systems have 5 health-based violations and 5 contaminant exceedances on record.
Safety & Violations
| Metric | Value |
|---|---|
| Average Safety Score | 10/100 (F worst) |
| Public Water Systems | 1 |
| Population Served | 1,089,893 |
| Health Violations | 5 |
| Monitoring Violations | 0 |
| Contaminant Exceedances | 5 |
| Enforcement Actions | 20 |
Contaminants Detected in Atlanta
| Contaminant | Detected | EPA Limit (MCL) | Status |
|---|---|---|---|
| Haloacetic Acids (HAA5) | 0.062 mg/l | 60 mg/l | Exceeds limit |
| Total Trihalomethanes | 0.081 mg/l | 80 mg/l | Exceeds limit |
| Total Coliform (TCR) | 2.5 % positive | 5 % positive | Within limit |
Detected levels are the highest reported across Atlanta systems for each contaminant. MCL = EPA Maximum Contaminant Level, the legal safety ceiling. Source: EPA SDWIS monitoring data.
Frequently Asked Questions
The 1 public water system serving Atlanta, Georgia (population 1,089,893) average a Water Safety Score of 10/100, with a worst grade of F. These systems have 5 health-based violations and 5 contaminant exceedances on record.
Monitoring data for Atlanta, Georgia shows 3 distinct contaminants detected in the public water supply — Haloacetic Acids (HAA5), Total Trihalomethanes, Total Coliform (TCR). Of these, 2 exceeded the EPA Maximum Contaminant Level.
Atlanta, Georgia is served by 1 public water system, together supplying water to roughly 1,089,893 people. The worst safety grade among them is F.
Yes. 2 contaminants exceeded the EPA Maximum Contaminant Level (MCL) in Atlanta: Haloacetic Acids (HAA5), Total Trihalomethanes. An exceedance means a detected level was higher than the legal safety limit at least once during monitoring.
The Water Safety Score (0-100, graded A-F) weighs health-based violations (40%), contaminant exceedances (30%), enforcement history (20%), and monitoring violations (10%), using EPA Safe Drinking Water Information System (SDWIS) data from the last 10 years.
Request your utility's annual Consumer Confidence Report (CCR), consider an independent test from a state-certified lab, and use an NSF-certified filter targeting any contaminant of concern. For lead specifically, run cold water 30 seconds before drinking.
More about Atlanta
The 1 public water system serving Atlanta, Georgia (population 1,089,893) average a Water Safety Score of 10/100, with a worst grade of F. These systems have 5 health-based violations and 5 contaminant exceedances on record.
The data source behind this answer is the EPA Safe Drinking Water Information System (SDWIS). Every figure on the page traces back to that source; the methodology page describes the inputs and the refresh cadence in full detail.
A practical caveat: the headline answer above reflects the most recent the EPA Safe Drinking Water Information System (SDWIS) vintage; underlying data is often revised for months after first publication, and the right reference for any specific decision is whichever vintage is current at the time of the decision. The as-of date is stamped on every page.
Source: EPA Ground Water and Drinking Water, 2026.