Skip to main content
WaterSafety

What's in the Water in Chandler, AZ?

Monitoring data for Chandler, Arizona shows 8 distinct contaminants detected in the public water supply — Total Trihalomethanes, Nitrate, PFOS/PFOA (PFAS), Gross Alpha, Uranium, and others. Of these, 1 exceeded the EPA Maximum Contaminant Level.

Contaminants Detected in Chandler

ContaminantDetectedEPA Limit (MCL)Status
Total Trihalomethanes0.085 mg/l80 mg/lExceeds limit
Nitrate5 ppm10 ppmWithin limit
PFOS/PFOA (PFAS)2 ppt4 pptWithin limit
Gross Alpha7.5 pCi/L15 pCi/LWithin limit
Uranium15 ppb30 ppbWithin limit
Gross Beta25 pCi/L50 pCi/LWithin limit
Trichloroethylene2.5 ppb5 ppbWithin limit
Arsenic5 ppb10 ppbWithin limit

Detected levels are the highest reported across Chandler systems for each contaminant. MCL = EPA Maximum Contaminant Level, the legal safety ceiling. Source: EPA SDWIS monitoring data.

Safety & Violations

MetricValue
Average Safety Score64/100 (D worst)
Public Water Systems1
Population Served247,328
Health Violations1
Monitoring Violations0
Contaminant Exceedances1
Enforcement Actions77

Frequently Asked Questions

Monitoring data for Chandler, Arizona shows 8 distinct contaminants detected in the public water supply — Total Trihalomethanes, Nitrate, PFOS/PFOA (PFAS), Gross Alpha, Uranium, and others. Of these, 1 exceeded the EPA Maximum Contaminant Level.

The 1 public water system serving Chandler, Arizona (population 247,328) average a Water Safety Score of 64/100, with a worst grade of D. These systems have 1 health-based violation and 1 contaminant exceedance on record.

Chandler, Arizona is served by 1 public water system, together supplying water to roughly 247,328 people. The worst safety grade among them is D.

Yes. 1 contaminant exceeded the EPA Maximum Contaminant Level (MCL) in Chandler: Total Trihalomethanes. An exceedance means a detected level was higher than the legal safety limit at least once during monitoring.

The Water Safety Score (0-100, graded A-F) weighs health-based violations (40%), contaminant exceedances (30%), enforcement history (20%), and monitoring violations (10%), using EPA Safe Drinking Water Information System (SDWIS) data from the last 10 years.

Request your utility's annual Consumer Confidence Report (CCR), consider an independent test from a state-certified lab, and use an NSF-certified filter targeting any contaminant of concern. For lead specifically, run cold water 30 seconds before drinking.

Monitoring data for Chandler, Arizona shows 8 distinct contaminants detected in the public water supply — Total Trihalomethanes, Nitrate, PFOS/PFOA (PFAS), Gross Alpha, Uranium, and others. Of these, 1 exceeded the EPA Maximum Contaminant Level.

This answer pulls from the EPA Safe Drinking Water Information System (SDWIS), the authoritative federal source for U.S. public drinking-water safety. The headline number above is the direct answer; what follows is the additional context most readers need to use the answer for a real decision rather than just a fact lookup.

For readers turning this answer into action: cross-reference against the underlying the EPA Safe Drinking Water Information System (SDWIS) record before acting on time-sensitive decisions. The site renders the data as it was published; subsequent revisions can shift the picture, and the live federal data is always the authoritative current reference.

Source: EPA Ground Water and Drinking Water, 2026.