Skip to main content
WaterSafety

Glen Burnie-Broadneck

Millersville, Maryland · PWSID: MD0020017

D
Water Safety Score
64/100
290,606
Population Served
Ground water
Source Type
1
Health Violations
1
Contaminant Exceedances

Detected Contaminants

ContaminantDetected LevelMCL (Limit)StatusSample Date
Combined Filter Effluent0.5 NTU1 NTUWithin LimitOct 1, 2021
Barium1000 ppb2000 ppbWithin LimitJan 1, 2020
Cadmium2.5 ppb5 ppbWithin LimitJan 1, 2020
Chromium50 ppb100 ppbWithin LimitJan 1, 2020
Mercury1 ppb2 ppbWithin LimitJan 1, 2020
Antimony3 ppb6 ppbWithin LimitJan 1, 2020
Beryllium2 ppb4 ppbWithin LimitJan 1, 2020
Thallium1 ppb2 ppbWithin LimitJan 1, 2020
Selenium25 ppb50 ppbWithin LimitJan 1, 2020
Nitrate5 ppm10 ppmWithin LimitJan 1, 2022
Fluoride2000 ppb4000 ppbWithin LimitJan 1, 2020

Violation History

Combined Filter Effluent
Health-BasedOct 1, 2021 - Oct 12, 2022
Resolved
Enforcement: 45
Combined Filter Effluent
Health-BasedOct 1, 2021 - Oct 12, 2022
Resolved
Enforcement: 45
Barium
Health-BasedJan 1, 2020 - Mar 29, 2023
Resolved
Enforcement: 48
Barium
Health-BasedJan 1, 2020 - Mar 29, 2023
Resolved
Enforcement: 48
Cadmium
Health-BasedJan 1, 2020 - Mar 29, 2023
Resolved
Enforcement: 48
Cadmium
Health-BasedJan 1, 2020 - Mar 29, 2023
Resolved
Enforcement: 48
Chromium
Health-BasedJan 1, 2020 - Mar 29, 2023
Resolved
Enforcement: 48
Chromium
Health-BasedJan 1, 2020 - Mar 29, 2023
Resolved
Enforcement: 48
Mercury
Health-BasedJan 1, 2020 - Mar 29, 2023
Resolved
Enforcement: 48
Mercury
Health-BasedJan 1, 2020 - Mar 29, 2023
Resolved
Enforcement: 48

Frequently Asked Questions

Glen Burnie-Broadneck has a Water Safety Score of D (64/100). The system serves 290,606 people and has 1 health violation on record. Check the contaminant table above for specific detected substances.

Glen Burnie-Broadneck has 1 contaminant exceedance above EPA health guidelines. See the full contaminant detection table above for all tested substances and their levels relative to legal limits and health guidelines.

The Water Safety Score (0-100, grades A through F) is based on contaminant levels relative to legal limits, health guideline exceedances, violation history, and enforcement actions. Higher scores indicate fewer concerns.

If your water system has violations, request the Consumer Confidence Report from your utility, consider getting an independent water test from a certified lab, and look into certified water filters for specific contaminants of concern. For lead, run cold water for 30 seconds before drinking.

Sources: EPA SDWIS, EWG Tap Water Database
Last updated:

Water quality data sourced from EPA's Safe Drinking Water Information System (SDWIS). Safety scores are calculated based on contaminant levels, violations, and enforcement history. This is not a substitute for your utility's official Consumer Confidence Report.