Skip to main content
WaterSafety

What's in the Water in Rio Grande, NJ?

Monitoring data for Rio Grande, New Jersey shows 6 distinct contaminants detected in the public water supply — Total Coliform (TCR), Nitrate, Combined Radium, Total Trihalomethanes, Haloacetic Acids (HAA5), and others. None exceeded the EPA Maximum Contaminant Level in the reported samples.

Contaminants Detected in Rio Grande

ContaminantDetectedEPA Limit (MCL)Status
Total Coliform (TCR)2.5 % positive5 % positiveWithin limit
Nitrate5 ppm10 ppmWithin limit
Combined Radium2.5 pCi/L5 pCi/LWithin limit
Total Trihalomethanes40 ppb80 ppbWithin limit
Haloacetic Acids (HAA5)30 ppb60 ppbWithin limit
E. coli0 presence0 presenceWithin limit

Detected levels are the highest reported across Rio Grande systems for each contaminant. MCL = EPA Maximum Contaminant Level, the legal safety ceiling. Source: EPA SDWIS monitoring data.

Safety & Violations

MetricValue
Average Safety Score79/100 (C worst)
Public Water Systems1
Population Served218,472
Health Violations0
Monitoring Violations1
Contaminant Exceedances0
Enforcement Actions78

Frequently Asked Questions

Monitoring data for Rio Grande, New Jersey shows 6 distinct contaminants detected in the public water supply — Total Coliform (TCR), Nitrate, Combined Radium, Total Trihalomethanes, Haloacetic Acids (HAA5), and others. None exceeded the EPA Maximum Contaminant Level in the reported samples.

The 1 public water system serving Rio Grande, New Jersey (population 218,472) average a Water Safety Score of 79/100, with a worst grade of C. These systems have no health-based violations on record.

Rio Grande, New Jersey is served by 1 public water system, together supplying water to roughly 218,472 people. The worst safety grade among them is C.

No. In the reported monitoring data for Rio Grande, no detected contaminant exceeded its EPA Maximum Contaminant Level (MCL).

The Water Safety Score (0-100, graded A-F) weighs health-based violations (40%), contaminant exceedances (30%), enforcement history (20%), and monitoring violations (10%), using EPA Safe Drinking Water Information System (SDWIS) data from the last 10 years.

Request your utility's annual Consumer Confidence Report (CCR), consider an independent test from a state-certified lab, and use an NSF-certified filter targeting any contaminant of concern. For lead specifically, run cold water 30 seconds before drinking.

Monitoring data for Rio Grande, New Jersey shows 6 distinct contaminants detected in the public water supply — Total Coliform (TCR), Nitrate, Combined Radium, Total Trihalomethanes, Haloacetic Acids (HAA5), and others. None exceeded the EPA Maximum Contaminant Level in the reported samples.

This answer pulls from the EPA Safe Drinking Water Information System (SDWIS), the authoritative federal source for U.S. public drinking-water safety. The headline number above is the direct answer; what follows is the additional context most readers need to use the answer for a real decision rather than just a fact lookup.

A practical caveat: the headline answer above reflects the most recent the EPA Safe Drinking Water Information System (SDWIS) vintage; underlying data is often revised for months after first publication, and the right reference for any specific decision is whichever vintage is current at the time of the decision. The as-of date is stamped on every page.

Source: EPA Ground Water and Drinking Water, 2026.